Oakridge I.T. Ltd Secure eBusiness | Sales, Support, Consultancy, Reseller, Retailer, VAR, Firewalls | SwyxGate is a gateway solution which consists of a software component and at least one ISDN card. SwyxGate converts incoming calls from the PSTN into IP packets and adapts outgoing calls from the IP network into signals and voice transmission to the PSTN. To interface with the PSTN, SwyxGate uses standard ISDN cards.

Do You Need Secure Internet Access connect remote offices connect moblie users reduce bandwidth usage content filtering load balancing ssl offloading & web compression voice over IP VOIP

SwyxServer

SwyxServer is the cornerstone of SwyxWare which provides all functions of a traditional PBX and far more.

Product Details

SwyxGate

SwyxGate represents the interface between IP-based telephony and the traditional telephone network.

Product DetailsSwyxWare Option Packs

Option Packs are software enhancements, giving SwyxWare even more useful functions.

SwyxFax: Fax for every user
Extended Call Routing: Interactive voice response and more
CTI for SwyxPhone: the remote control for your telephone

SWYX Gateway

SwyxGate is a gateway solution which consists of a software component and at least one ISDN card. SwyxGate converts incoming calls from the PSTN into IP packets and adapts outgoing calls from the IP network into signals and voice transmission to the PSTN. To interface with the PSTN, SwyxGate uses standard ISDN cards.

Scalable gateway solution

The maximum number of simultaneous connections to the telephone network depends only on the user's communication requirements and can range from 2 to 30 for a single SwyxGate. SwyxGate can be installed on a stand-alone PC as well as on the SwyxServer PC for smaller installations. The administration of SwyxGate is performed with Microsoft's Management Console (MMC).

Easy migration

SwyxGate can communicate with an existing classical PBX and therefore allows a step by step migration to IP telephony. Therefore, SwyxGate can cope with short-term bottlenecks concerning the existing PBX and new locations can be established without a costly extension of the old PBX. In this case, SwyxGate is simply installed as a sub-PBX of the existing telephone infrastructure and will gradually take over the functionality of the old PBX.

2, 4, 6, 8 or 16 ISDN B-channels using up to 8 BRI-lines (So) per SwyxGate-PC
Automatic service restart in case of errors (watchdog)
Call Detail Records (CDR)
Configuration via Microsoft Management Console (MMC)
Dialing by blockdialing
Dialing by overlap sending
DTMF generation
FAX- and DTMF support
Fax-Integration¹
Fax-over-IP (T.38)
Interactive Voice Response (IVR) via DTMF
Internal ISDN PRI/BRI for connecting sub-PBXs
Internal ISDN PRI/BRI for data transfer
Least Cost Routing
Line echo compensation (G.165)
Multi gateway support
Per SwyxGate-PC a maximum of 1 ISDN PRI and 8 ISDN BRI ports
Status display for all connections
Status display via MMC
Supports H.323 terminals (H.323 version 2)
Supports SIP (Session Initiation Protocol)²
Up to 30 ISDN B-channels using 1 PRI-line (S2m)
Voice compression
Voice encoding according to G.711 (64kbit/s)

Requirments

Microsoft® Windows® 2000 Server or Microsoft® Windows® Server 2003
CPU: PIII 800 MHz or comparable processor for 1-4 S0-cards (2-8 B-channels), PC with Pentium III 1,4 GHz or comparable processor for S2m-card (30 B-channels)
One PCI-slot for each ISDN-PC-card
Memory: 384 MB
Hard Disk: 50 MB

For further details about the hardware requirements for SwyxServer please Contact Us

¹ In conjunction with SwyxWare option pack

² Available with SwyxWare version 4.40